扫一扫
<衡水>(当地)软管泵滑模机价格实惠工厂直供
软管泵主要有泵壳、转子体、减速机、机座和软管等5大部分组成。泵的耐久性主要决定于管子的弹性和耐腐蚀性，其流量与电动机的转速和管子内径大小有关。
The hose pump is mainly composed of 5 parts: pump casing, rotor body, reducer, base and hose. The durability of the pump is mainly determined by the elasticity and corrosion resistance of the pipe, and its flow rate is related to the speed of the motor and the inner diameter of the pipe.
工业软管泵不锈钢齿轮泵，可输送非润滑油饮料低腐蚀性液体，配铜齿轮可输送汽油苯等低内点液体。由于齿轮泵自吸能力差，一般是由于齿轮泵泵腔间隙较大所致。同时也是如果齿轮泵输出端没有“止回阀”，则必须是下一级齿轮泵的止回阀或控制阀。移动固定后，周围工作人员可恢复手术。
Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.
我们的使命是成为具创新的 滑模机企业，并在所服务的 滑模机市场中成为备受推崇的供应商。豫信致诚机械设备有限公司会自始至终保持 滑模机产品的高品质，并且不短推陈出新，为新老客户创造更高的价值。
技术支持：059t.com
